03.04.2019 FW T13006

IMPORTANT NOTES:
- ONVIF certification has NOT been passed with version 18.12 of the tool;
- Version 18.06 is no longer supported by ONVIF so this FW cannot be ONVIF certified even if it has the same ONVIF features of T13005;
- This FW is NOT meant to be installed in production cameras;
- It can be recommended to customers as a post-installation upgrade;

Bugfixes:
- Fixed user IR level setting management on the new temperature management algorithm: the algorithm does not stay always on max power, but follows the user setting;
- Bugzilla 776: Fixed wrong calculation of the last Sunday on March 2019 causing DST to be enabled one week earlier in Italy;
- Bugzilla 639: Reduced the chance to get Error 502 "Bad Gateway" on "systempush" CGI (not completely solved yet);
- Bugzilla 643: Removed unnecessary information in day/night page for some models;
- Bugzilla 645: Removed unnecessary second comma in the description of IR Cut Filter Mode;
- Bugzilla 769: Corrected family name for Smart series;
- Bugzilla 773: Corrected the font size of the remote playback window that used to be too large;
- Bugzilla 766: On PTZ privacy mask editing page, now all other previously created masks are visible;
- Bugzilla 764: There is no false motion detection anymore when refocus takes a long time;
- Bugzilla 765: The original PTZ position does not change anymore when coming back from a preset position (PTZ action);
- Bugzilla 750: Now a tour will continue running even after a flip/mirror rotation;

Known issues:
- Bugzilla 639: Frequent Error 502 "Bad Gateway" on "systempush" or "analyticsstatuspush" CGI;

15.03.2019 FW T13005

New features:
- Added new Spark logo and updated all cameras family name;	
- Extended copyright to 2019;	
- New temperature management algorithm based on PI controller (regulating IR led power);
- New IR led manual wide/tele balance formula;
- Improve the ODM's PTZ control in pan, tilt and zoom. (note: Lumina zoom has no support for speed control);
- API change: now it is possible to create/edit/delete a PTZ preset with arbitrary index;
- Improved the firmware upgrade procedure with configuration restored to default;	
- Changed bitrate control mode from VBR to CBR by default, and adjusted the default bitrate values accordingly.	
- Added new IVS license files for new production batches;
- Added audio detect to analyticsstatpush;
- Adjusted some default config setting for PeopleCountingSupport (root.IVS.CrowdDensity.MaxCnt=1);
- Removed the home button in the PTZ privacy mask page;
- ONVIF certification passed with version 18.06 of the certification tool;

Bugfixes:
- TFS 5462: mounting Lumina on a Unica previously connected to Mira/Kiara no longer produces an unrecoverable status;
- TFS 5109: PTZ HTTP API: corrected incoherent response and results trying to save arbitrary preset number;
- TFS 5110: PTZ HTTP API: invalid ptzset commands are not accepted anymore;
- Bugilla 651: PTZ now correctly returns to the previous position when the event action ends;
- Bugzilla 666: PTZ HTTP API: ptzset?gotoserverpresetno does not accept invalid preset indexes anymore;
- Bugzilla 667: PTZ HTTP API: ptzset?move=home no longer returns "OK" when PTZ.PresetPos.HomePos=none;
- Bugzilla 635: When running a PTZ tour, the last preset position no longer stays for 2 seconds only;
- Bugzilla 650: Running a preset and adjusting zoom in/out will not trigger a motion detection event anymore;
- Bugzilla 629: Corrected small colored lines in all top page buttons on Firefox and Chrome (not visible on Edge);
- Fixed the arrow buttons in the mirror/flip/rotation page, since on some circumstances they used to move on the
wrong direction;

Known issues:
- Bugzilla 639: Frequent Error 502 "Bad Gateway" on "systempush" or "analyticsstatuspush" CGI;
- See bugs corrected in version T13006;

20.11.2018 FW T13002
 - Support for 4 new products: Lumina 2000 (PTZ), B1 2000, B2 5000, D1 2000
 - New ONVIF layer implementation based on gSOAP library for better compatibility
 - ONVIF certified with ONVIF Device Test Tool version 18.06
 - New PTZ UI for Lumina
 - New event management and video bitrate limitations when recording to SD card
 - Added support for ETX4 and FAT32 file systems on SD card
 - Added support for different OSD font sizes to adapt to several video resolutions
 - Added new CGI for video analytics - analyticsstatuspush
 - Added support for Thumbnails stream profile
 - Fixed ONVIF issues with Avigilon VMS
 - Several minor bug fixes

Known issues
 - When upgrading from previous versions such as T12003, the old stream profiles will be
   kept and the Thumbnails video profile will not be added; to align the stream profiles
   on all cameras it is recommended to reset the camera configuration to factory default

30.05.2018 FW 0530T12003 (T12003)
 - Based on version T12002 with only minor changes related to ONVIF
 - Fixed media profile management via ONVIF
 - Fixed compatibility with ONVIF Device Test Tool version 17.12
 - ONVIF certified with ONVIF Device Test Tool version 17.12

Known issues
 - When upgrading to version 12003, the camera may show a
   "Compatible list not supported" error message and reject the FW file
   to work around the issue, reset the camera configuration to factory default

04.05.2018 FW 0504T12002 (T12002)
 - Failed ONVIF certification with ONVIF Device Test Tool version 17.12 - superseded by version T12003
 - IVS support correctly enabled on all Kiara/Mira products
 - Enabled I/O management through ONVIF
 - fixed H.265 RTSP streaming compliancy
 - Improved thermal management to extend IR LEDs life  
 - Reduced probability of SD card corruption and implemented automatic recovery
 - Camera name set through ONVIF is no longer lost after a reboot
 - Many minor bug fixes

Known issues
 - When upgrading to version 12002, the camera may show a
   "Compatible list not supported" error message and reject the FW file
   to work around the issue, reset the camera configuration to factory default

10.11.2017 FW 1103T12 (T12)
 - Added IVS support
   ° Tampering
   ° Tripwire
   ° Perimeter
   ° Crowd
 - Support for selective restore
 - Better management of "powerline frequency" sync
 - Improved backplate support
 - Onvif compliancy certification
 - Improved "Low Light Behavior settings" management
 - Improved recording on both uSD and Network server
 - support for digital zoom in Chrome/Edge/Firefox browsers
 - bug fixes

03.06.2017 FW 0603T11003 (T11003)
 - Fixed uSD recognition at boot
 - Added audio streaming support in IExplorer homepage
 - Disabled blue led flashing on WiFi connection
 - Fixed bug on Bonjour naming for cameras mounting L22 lens

24.05.2017 FW 0524T11002 (T11002)
 - Added missing pages HTTPS and IP Filtering
 - Fixed recording holes problem in Genetec (and maybe other NVR)
 - Added Italian language pack

28.04.2017 FW 0428T11 (T11)
 - Introduced new Spark UI, 
 - Rewrite of Scheduler page
 - Added support for digital zoom in Chrome/Edge/Firefox
 - Fixed integration problems with Genetec 

13.01.2017 FW 0113T10 (T10)
 - First firmware with "dark" UI