08.08.2019 FW T13010 New features: - Added GPS node in device.conf; - Added DIDO status info to analyticsstatuspush response; - Wifi is now enabled by default (it must be disable manually after the first boot or a reset to default); - Added dropbear for ssh and removed telnet (Enable with http:///cgi-bin/admin/param?action=update&terminalP=22 Password: Twitbuddy168) - Added a flag for analyticsstatuspush support (Properties.Analytics.AnalyticsPush) - Web UI - the file explorer will show only *.img files on the firmware upgrade page (NOTE: the filter is not supported by Edge); - Web UI - the DIDO status web page is now updated in real time; - Added old Onvif interface for ISS on port 80 (improves compatibility with broken third-party applications); NOTE: the new ONVIF interface has been moved from port 8080 to 1120, so port 8080 can be used for the web UI service; - Added reminder to change password at first access - Modified the ptzconfig CGI to allow setting the preset name by index (e.g. ptzconfig?setserverpresetno=22&name=APP) - ONVIF certification passed with version 18.12 of the certification tool; Bugfixes: - Bugzilla 819 - Rare issue: sometimes a camera may show a wrong Product Code like SR-C-S2-MIRA-V-IR (without lens info) (installing this firmware will fix the issue on any affected camera, so we don't need to replace them anymore); - TFS 5129: Wrong behaviour of the camera's bonjour service when the camera is linked to cisco switch; - Bugzilla 639: Error 502 "Bad Gateway" on "systempush" CGI - Bugzilla 787: "xml tree unable to load" error in the camera log: the camera can't reply to CGI requests; - TFS bugs 5110, 5107 and 5106: for Argo integration: some ptzset/ptzconfig CGI message formatting has been modified; - TFS 5780: Analytics Edge: People Counting is removed from Properties.IVS but still present in IVS and systempush - TFS 5735: ONVIF GetSystemDateAndTimeResponse contains incoherent info for LocalDateTime and TimeZone - Bugzilla 799: General.UserID.Admin accepts invalid values and then a hard reset is needed to recover the camera - Bugzilla 777: device search issue by Avigilon (new ACC version 6.14 could only detect 1 camera of each model) - TFS 5904: Motion area removal incorrect behaviour - Bugzilla 688: event server index is wrong if S0 has been removed - Fixed the auto IRIS bug causing the IRIS to remain stuck in closed position even in low light conditions; - Fixed an unusual bug: after executing a preset go-back function, doing the "mirror/flip/rotation" with different PTZ position, will retrigger the go-back preset, which is unexpected. - Fixed B1 web page randomly damaged issue by changing the compression method of initramfs (LZMA is somehow weird). Now is Kernel LZMA + initramfs XZ; old setting was Kernel Gzip + initramf LZMA) - Bugzilla 816/817 - When we set HTTP on port 8080 the web UI is not reachable anymore, requiring an hard reset of the camera - Bugzilla 827 - Lumina: cannot edit the home preset under certain conditions; - Fixed a bug causing an unexpected reset to default after a firmware upgrade; 03.04.2019 FW T13006 IMPORTANT NOTES: - ONVIF certification has NOT been passed with version 18.12 of the tool; - Version 18.06 is no longer supported by ONVIF so this FW cannot be ONVIF certified even if it has the same ONVIF features of T13005; - This FW is NOT meant to be installed in production cameras; - It can be recommended to customers as a post-installation upgrade; Bugfixes: - Fixed user IR level setting management on the new temperature management algorithm: the algorithm does not stay always on max power, but follows the user setting; - Bugzilla 776: Fixed wrong calculation of the last Sunday on March 2019 causing DST to be enabled one week earlier in Italy; - Bugzilla 639: Reduced the chance to get Error 502 "Bad Gateway" on "systempush" CGI (not completely solved yet); - Bugzilla 643: Removed unnecessary information in day/night page for some models; - Bugzilla 645: Removed unnecessary second comma in the description of IR Cut Filter Mode; - Bugzilla 769: Corrected family name for Smart series; - Bugzilla 773: Corrected the font size of the remote playback window that used to be too large; - Bugzilla 766: On PTZ privacy mask editing page, now all other previously created masks are visible; - Bugzilla 764: There is no false motion detection anymore when refocus takes a long time; - Bugzilla 765: The original PTZ position does not change anymore when coming back from a preset position (PTZ action); - Bugzilla 750: Now a tour will continue running even after a flip/mirror rotation; Known issues: - Bugzilla 639: Frequent Error 502 "Bad Gateway" on "systempush" or "analyticsstatuspush" CGI; 15.03.2019 FW T13005 New features: - Added new Spark logo and updated all cameras family name; - Extended copyright to 2019; - New temperature management algorithm based on PI controller (regulating IR led power); - New IR led manual wide/tele balance formula; - Improve the ODM's PTZ control in pan, tilt and zoom. (note: Lumina zoom has no support for speed control); - API change: now it is possible to create/edit/delete a PTZ preset with arbitrary index; - Improved the firmware upgrade procedure with configuration restored to default; - Changed bitrate control mode from VBR to CBR by default, and adjusted the default bitrate values accordingly. - Added new IVS license files for new production batches; - Added audio detect to analyticsstatpush; - Adjusted some default config setting for PeopleCountingSupport (root.IVS.CrowdDensity.MaxCnt=1); - Removed the home button in the PTZ privacy mask page; - ONVIF certification passed with version 18.06 of the certification tool; Bugfixes: - TFS 5462: mounting Lumina on a Unica previously connected to Mira/Kiara no longer produces an unrecoverable status; - TFS 5109: PTZ HTTP API: corrected incoherent response and results trying to save arbitrary preset number; - TFS 5110: PTZ HTTP API: invalid ptzset commands are not accepted anymore; - Bugilla 651: PTZ now correctly returns to the previous position when the event action ends; - Bugzilla 666: PTZ HTTP API: ptzset?gotoserverpresetno does not accept invalid preset indexes anymore; - Bugzilla 667: PTZ HTTP API: ptzset?move=home no longer returns "OK" when PTZ.PresetPos.HomePos=none; - Bugzilla 635: When running a PTZ tour, the last preset position no longer stays for 2 seconds only; - Bugzilla 650: Running a preset and adjusting zoom in/out will not trigger a motion detection event anymore; - Bugzilla 629: Corrected small colored lines in all top page buttons on Firefox and Chrome (not visible on Edge); - Fixed the arrow buttons in the mirror/flip/rotation page, since on some circumstances they used to move on the wrong direction; Known issues: - Bugzilla 639: Frequent Error 502 "Bad Gateway" on "systempush" or "analyticsstatuspush" CGI; - See bugs corrected in version T13006; 20.11.2018 FW T13002 - Support for 4 new products: Lumina 2000 (PTZ), B1 2000, B2 5000, D1 2000 - New ONVIF layer implementation based on gSOAP library for better compatibility - ONVIF certified with ONVIF Device Test Tool version 18.06 - New PTZ UI for Lumina - New event management and video bitrate limitations when recording to SD card - Added support for ETX4 and FAT32 file systems on SD card - Added support for different OSD font sizes to adapt to several video resolutions - Added new CGI for video analytics - analyticsstatuspush - Added support for Thumbnails stream profile - Fixed ONVIF issues with Avigilon VMS - Several minor bug fixes Known issues - When upgrading from previous versions such as T12003, the old stream profiles will be kept and the Thumbnails video profile will not be added; to align the stream profiles on all cameras it is recommended to reset the camera configuration to factory default 30.05.2018 FW 0530T12003 (T12003) - Based on version T12002 with only minor changes related to ONVIF - Fixed media profile management via ONVIF - Fixed compatibility with ONVIF Device Test Tool version 17.12 - ONVIF certified with ONVIF Device Test Tool version 17.12 Known issues - When upgrading to version 12003, the camera may show a "Compatible list not supported" error message and reject the FW file to work around the issue, reset the camera configuration to factory default 04.05.2018 FW 0504T12002 (T12002) - Failed ONVIF certification with ONVIF Device Test Tool version 17.12 - superseded by version T12003 - IVS support correctly enabled on all Kiara/Mira products - Enabled I/O management through ONVIF - fixed H.265 RTSP streaming compliancy - Improved thermal management to extend IR LEDs life - Reduced probability of SD card corruption and implemented automatic recovery - Camera name set through ONVIF is no longer lost after a reboot - Many minor bug fixes Known issues - When upgrading to version 12002, the camera may show a "Compatible list not supported" error message and reject the FW file to work around the issue, reset the camera configuration to factory default 10.11.2017 FW 1103T12 (T12) - Added IVS support ° Tampering ° Tripwire ° Perimeter ° Crowd - Support for selective restore - Better management of "powerline frequency" sync - Improved backplate support - Onvif compliancy certification - Improved "Low Light Behavior settings" management - Improved recording on both uSD and Network server - support for digital zoom in Chrome/Edge/Firefox browsers - bug fixes 03.06.2017 FW 0603T11003 (T11003) - Fixed uSD recognition at boot - Added audio streaming support in IExplorer homepage - Disabled blue led flashing on WiFi connection - Fixed bug on Bonjour naming for cameras mounting L22 lens 24.05.2017 FW 0524T11002 (T11002) - Added missing pages HTTPS and IP Filtering - Fixed recording holes problem in Genetec (and maybe other NVR) - Added Italian language pack 28.04.2017 FW 0428T11 (T11) - Introduced new Spark UI, - Rewrite of Scheduler page - Added support for digital zoom in Chrome/Edge/Firefox - Fixed integration problems with Genetec 13.01.2017 FW 0113T10 (T10) - First firmware with "dark" UI